CellRendererTextProtocol

Untyped pointer to the underlying GtkCellRendererText instance.

Typed pointer to the underlying GtkCellRendererText instance.

Required Initialiser for types conforming to CellRendererTextProtocol

Bind a CellRendererTextPropertyName source property to a given target object.

Get the value of a CellRendererText property

Set the value of a CellRendererText property. Note that this will only have an effect on properties that are writable and not construct-only!

Connect a Swift signal handler to the given, typed CellRendererTextSignalName signal

Connect a C signal handler to the given, typed CellRendererTextSignalName signal

This signal is emitted after renderer has been edited.

It is the responsibility of the application to update the model and store new_text at the position indicated by path.

Typed edited signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::align-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::alignment signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::attributes signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::background signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::background-gdk signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::background-rgba signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::background-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::editable signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::editable-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::ellipsize signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::ellipsize-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::family signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::family-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::font signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::font-desc signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::foreground signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::foreground-gdk signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::foreground-rgba signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::foreground-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::language signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::language-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::markup signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::max-width-chars signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::placeholder-text signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::rise signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::rise-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::scale signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::scale-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::single-paragraph-mode signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::size signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::size-points signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::size-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::stretch signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::stretch-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::strikethrough signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::strikethrough-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::style signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::style-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::text signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::underline signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::underline-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::variant signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::variant-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::weight signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::weight-set signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::width-chars signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::wrap-mode signal for using the connect(signal:) methods

The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

(C Language Example):

g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

It is important to note that you must use canonical parameter names as detail strings for the notify signal.

Typed notify::wrap-width signal for using the connect(signal:) methods

Sets the height of a renderer to explicitly be determined by the “font” and “y_pad” property set on it. Further changes in these properties do not affect the height, so they must be accompanied by a subsequent call to this function. Using this function is unflexible, and should really only be used if calculating the size of a cell is too slow (ie, a massive number of cells displayed). If number_of_rows is -1, then the fixed height is unset, and the height is determined by the properties again.

Undocumented