CellRendererTextProtocol

public protocol CellRendererTextProtocol : CellRendererProtocol

Renders text in a cell

A GtkCellRendererText renders a given text in its cell, using the font, color and style information provided by its properties. The text will be ellipsized if it is too long and the GtkCellRendererText:ellipsize property allows it.

If the GtkCellRenderer:mode is GTK_CELL_RENDERER_MODE_EDITABLE, the GtkCellRendererText allows to edit its text using an entry.

The CellRendererTextProtocol protocol exposes the methods and properties of an underlying GtkCellRendererText instance. The default implementation of these can be found in the protocol extension below. For a concrete class that implements these methods and properties, see CellRendererText. Alternatively, use CellRendererTextRef as a lighweight, unowned reference if you already have an instance you just want to use.

Show on GitHub
  • ptr

    Untyped pointer to the underlying GtkCellRendererText instance.

    Declaration

    Swift

    var ptr: UnsafeMutableRawPointer! { get }
    Show on GitHub
  • cell_renderer_text_ptr Default implementation

    Typed pointer to the underlying GtkCellRendererText instance.

    Default Implementation

    Return the stored, untyped pointer as a typed pointer to the GtkCellRendererText instance.

    Declaration

    Swift

    var cell_renderer_text_ptr: UnsafeMutablePointer<GtkCellRendererText>! { get }
    Show on GitHub

  • Required Initialiser for types conforming to CellRendererTextProtocol

    Declaration

    Swift

    init(raw: UnsafeMutableRawPointer)
    Show on GitHub

CellRendererText Class

  • Bind a CellRendererTextPropertyName source property to a given target object.

    Declaration

    Swift

    @discardableResult
@inlinable
func bind<Q, T>(property source_property: CellRendererTextPropertyName, to target: T, _ target_property: Q, flags f: BindingFlags = .default, transformFrom transform_from: @escaping GLibObject.ValueTransformer = { $0.transform(destValue: $1) }, transformTo transform_to: @escaping GLibObject.ValueTransformer = { $0.transform(destValue: $1) }) -> BindingRef! where Q : PropertyNameProtocol, T : ObjectProtocol

    Parameters

    source_property

    the source property to bind
    target

    the target object to bind to
    target_property

    the target property to bind to
    flags

    the flags to pass to the Binding
    transform_from

    ValueTransformer to use for forward transformation
    transform_to

    ValueTransformer to use for backwards transformation

    Return Value

    binding reference or nil in case of an error

    Show on GitHub
  • get(property:) Extension method

    Get the value of a CellRendererText property

    Declaration

    Swift

    @inlinable
func get(property: CellRendererTextPropertyName) -> GLibObject.Value

    Parameters

    property

    the property to get the value for

    Return Value

    the value of the named property

    Show on GitHub
  • set(property:value:) Extension method

    Set the value of a CellRendererText property. Note that this will only have an effect on properties that are writable and not construct-only!

    Declaration

    Swift

    @inlinable
func set(property: CellRendererTextPropertyName, value v: GLibObject.Value)

    Parameters

    property

    the property to get the value for

    Return Value

    the value of the named property

    Show on GitHub

CellRendererText signals

  • Connect a Swift signal handler to the given, typed CellRendererTextSignalName signal

    Declaration

    Swift

    @discardableResult
@inlinable
func connect(signal s: CellRendererTextSignalName, flags f: ConnectFlags = ConnectFlags(0), handler h: @escaping SignalHandler) -> Int

    Parameters

    signal

    The signal to connect
    flags

    The connection flags to use
    data

    A pointer to user data to provide to the callback
    destroyData

    A GClosureNotify C function to destroy the data pointed to by userData
    handler

    The Swift signal handler (function or callback) to invoke on the given signal

    Return Value

    The signal handler ID (always greater than 0 for successful connections)

    Show on GitHub

  • Connect a C signal handler to the given, typed CellRendererTextSignalName signal

    Declaration

    Swift

    @discardableResult
@inlinable
func connect(signal s: CellRendererTextSignalName, flags f: ConnectFlags = ConnectFlags(0), data userData: gpointer!, destroyData destructor: GClosureNotify? = nil, signalHandler h: @escaping GCallback) -> Int

    Parameters

    signal

    The signal to connect
    flags

    The connection flags to use
    data

    A pointer to user data to provide to the callback
    destroyData

    A GClosureNotify C function to destroy the data pointed to by userData
    signalHandler

    The C function to be called on the given signal

    Return Value

    The signal handler ID (always greater than 0 for successful connections)

    Show on GitHub
  • onEdited(flags:handler:) Extension method

    This signal is emitted after renderer has been edited.

    It is the responsibility of the application to update the model and store new_text at the position indicated by path.

    Note

    This represents the underlying edited signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onEdited(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ path: String, _ newText: String) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    path

    the path identifying the edited cell
    newText

    the new text
    handler

    The signal handler to call Run the given callback whenever the edited signal is emitted
    Show on GitHub
  • editedSignal Extension method

    Typed edited signal for using the connect(signal:) methods

    Declaration

    Swift

    static var editedSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::align-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyAlignSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyAlignSet signal is emitted
    Show on GitHub
  • notifyAlignSetSignal Extension method

    Typed notify::align-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyAlignSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::alignment signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyAlignment(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyAlignment signal is emitted
    Show on GitHub
  • notifyAlignmentSignal Extension method

    Typed notify::alignment signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyAlignmentSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::attributes signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyAttributes(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyAttributes signal is emitted
    Show on GitHub
  • notifyAttributesSignal Extension method

    Typed notify::attributes signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyAttributesSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::background signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyBackground(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyBackground signal is emitted
    Show on GitHub
  • notifyBackgroundSignal Extension method

    Typed notify::background signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyBackgroundSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::background-rgba signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyBackgroundRgba(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyBackgroundRgba signal is emitted
    Show on GitHub
  • notifyBackgroundRgbaSignal Extension method

    Typed notify::background-rgba signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyBackgroundRgbaSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::background-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyBackgroundSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyBackgroundSet signal is emitted
    Show on GitHub
  • notifyBackgroundSetSignal Extension method

    Typed notify::background-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyBackgroundSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::editable signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyEditable(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyEditable signal is emitted
    Show on GitHub
  • notifyEditableSignal Extension method

    Typed notify::editable signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyEditableSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::editable-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyEditableSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyEditableSet signal is emitted
    Show on GitHub
  • notifyEditableSetSignal Extension method

    Typed notify::editable-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyEditableSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::ellipsize signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyEllipsize(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyEllipsize signal is emitted
    Show on GitHub
  • notifyEllipsizeSignal Extension method

    Typed notify::ellipsize signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyEllipsizeSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::ellipsize-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyEllipsizeSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyEllipsizeSet signal is emitted
    Show on GitHub
  • notifyEllipsizeSetSignal Extension method

    Typed notify::ellipsize-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyEllipsizeSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::family signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyFamily(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyFamily signal is emitted
    Show on GitHub
  • notifyFamilySignal Extension method

    Typed notify::family signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyFamilySignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::family-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyFamilySet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyFamilySet signal is emitted
    Show on GitHub
  • notifyFamilySetSignal Extension method

    Typed notify::family-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyFamilySetSignal: CellRendererTextSignalName { get }
    Show on GitHub
  • onNotifyFont(flags:handler:) Extension method

    The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::font signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyFont(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyFont signal is emitted
    Show on GitHub
  • notifyFontSignal Extension method

    Typed notify::font signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyFontSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::font-desc signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyFontDesc(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyFontDesc signal is emitted
    Show on GitHub
  • notifyFontDescSignal Extension method

    Typed notify::font-desc signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyFontDescSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::foreground signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyForeground(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyForeground signal is emitted
    Show on GitHub
  • notifyForegroundSignal Extension method

    Typed notify::foreground signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyForegroundSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::foreground-rgba signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyForegroundRgba(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyForegroundRgba signal is emitted
    Show on GitHub
  • notifyForegroundRgbaSignal Extension method

    Typed notify::foreground-rgba signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyForegroundRgbaSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::foreground-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyForegroundSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyForegroundSet signal is emitted
    Show on GitHub
  • notifyForegroundSetSignal Extension method

    Typed notify::foreground-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyForegroundSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::language signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyLanguage(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyLanguage signal is emitted
    Show on GitHub
  • notifyLanguageSignal Extension method

    Typed notify::language signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyLanguageSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::language-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyLanguageSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyLanguageSet signal is emitted
    Show on GitHub
  • notifyLanguageSetSignal Extension method

    Typed notify::language-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyLanguageSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::markup signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyMarkup(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyMarkup signal is emitted
    Show on GitHub
  • notifyMarkupSignal Extension method

    Typed notify::markup signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyMarkupSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::max-width-chars signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyMaxWidthChars(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyMaxWidthChars signal is emitted
    Show on GitHub
  • notifyMaxWidthCharsSignal Extension method

    Typed notify::max-width-chars signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyMaxWidthCharsSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::placeholder-text signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyPlaceholderText(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyPlaceholderText signal is emitted
    Show on GitHub
  • notifyPlaceholderTextSignal Extension method

    Typed notify::placeholder-text signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyPlaceholderTextSignal: CellRendererTextSignalName { get }
    Show on GitHub
  • onNotifyRise(flags:handler:) Extension method

    The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::rise signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyRise(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyRise signal is emitted
    Show on GitHub
  • notifyRiseSignal Extension method

    Typed notify::rise signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyRiseSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::rise-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyRiseSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyRiseSet signal is emitted
    Show on GitHub
  • notifyRiseSetSignal Extension method

    Typed notify::rise-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyRiseSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::scale signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyScale(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyScale signal is emitted
    Show on GitHub
  • notifyScaleSignal Extension method

    Typed notify::scale signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyScaleSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::scale-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyScaleSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyScaleSet signal is emitted
    Show on GitHub
  • notifyScaleSetSignal Extension method

    Typed notify::scale-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyScaleSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::single-paragraph-mode signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifySingleParagraphMode(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifySingleParagraphMode signal is emitted
    Show on GitHub

  • Typed notify::single-paragraph-mode signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifySingleParagraphModeSignal: CellRendererTextSignalName { get }
    Show on GitHub
  • onNotifySize(flags:handler:) Extension method

    The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::size signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifySize(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifySize signal is emitted
    Show on GitHub
  • notifySizeSignal Extension method

    Typed notify::size signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifySizeSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::size-points signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifySizePoints(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifySizePoints signal is emitted
    Show on GitHub
  • notifySizePointsSignal Extension method

    Typed notify::size-points signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifySizePointsSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::size-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifySizeSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifySizeSet signal is emitted
    Show on GitHub
  • notifySizeSetSignal Extension method

    Typed notify::size-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifySizeSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::stretch signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStretch(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStretch signal is emitted
    Show on GitHub
  • notifyStretchSignal Extension method

    Typed notify::stretch signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStretchSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::stretch-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStretchSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStretchSet signal is emitted
    Show on GitHub
  • notifyStretchSetSignal Extension method

    Typed notify::stretch-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStretchSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::strikethrough signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStrikethrough(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStrikethrough signal is emitted
    Show on GitHub
  • notifyStrikethroughSignal Extension method

    Typed notify::strikethrough signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStrikethroughSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::strikethrough-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStrikethroughSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStrikethroughSet signal is emitted
    Show on GitHub
  • notifyStrikethroughSetSignal Extension method

    Typed notify::strikethrough-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStrikethroughSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::style signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStyle(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStyle signal is emitted
    Show on GitHub
  • notifyStyleSignal Extension method

    Typed notify::style signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStyleSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::style-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyStyleSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyStyleSet signal is emitted
    Show on GitHub
  • notifyStyleSetSignal Extension method

    Typed notify::style-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyStyleSetSignal: CellRendererTextSignalName { get }
    Show on GitHub
  • onNotifyText(flags:handler:) Extension method

    The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::text signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyText(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyText signal is emitted
    Show on GitHub
  • notifyTextSignal Extension method

    Typed notify::text signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyTextSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::underline signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyUnderline(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyUnderline signal is emitted
    Show on GitHub
  • notifyUnderlineSignal Extension method

    Typed notify::underline signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyUnderlineSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::underline-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyUnderlineSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyUnderlineSet signal is emitted
    Show on GitHub
  • notifyUnderlineSetSignal Extension method

    Typed notify::underline-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyUnderlineSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::variant signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyVariant(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyVariant signal is emitted
    Show on GitHub
  • notifyVariantSignal Extension method

    Typed notify::variant signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyVariantSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::variant-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyVariantSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyVariantSet signal is emitted
    Show on GitHub
  • notifyVariantSetSignal Extension method

    Typed notify::variant-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyVariantSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::weight signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyWeight(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyWeight signal is emitted
    Show on GitHub
  • notifyWeightSignal Extension method

    Typed notify::weight signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyWeightSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::weight-set signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyWeightSet(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyWeightSet signal is emitted
    Show on GitHub
  • notifyWeightSetSignal Extension method

    Typed notify::weight-set signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyWeightSetSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::width-chars signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyWidthChars(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyWidthChars signal is emitted
    Show on GitHub
  • notifyWidthCharsSignal Extension method

    Typed notify::width-chars signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyWidthCharsSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::wrap-mode signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyWrapMode(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyWrapMode signal is emitted
    Show on GitHub
  • notifyWrapModeSignal Extension method

    Typed notify::wrap-mode signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyWrapModeSignal: CellRendererTextSignalName { get }
    Show on GitHub

  • The notify signal is emitted on an object when one of its properties has its value set through g_object_set_property(), g_object_set(), et al.

    Note that getting this signal doesn’t itself guarantee that the value of the property has actually changed. When it is emitted is determined by the derived GObject class. If the implementor did not create the property with G_PARAM_EXPLICIT_NOTIFY, then any call to g_object_set_property() results in notify being emitted, even if the new value is the same as the old. If they did pass G_PARAM_EXPLICIT_NOTIFY, then this signal is emitted only when they explicitly call g_object_notify() or g_object_notify_by_pspec(), and common practice is to do that only when the value has actually changed.

    This signal is typically used to obtain change notification for a single property, by specifying the property name as a detail in the g_signal_connect() call, like this:

    (C Language Example):

    g_signal_connect (text_view->buffer, "notify::paste-target-list",
                  G_CALLBACK (gtk_text_view_target_list_notify),
                  text_view)

    It is important to note that you must use canonical parameter names as detail strings for the notify signal.

    Note

    This represents the underlying notify::wrap-width signal

    Declaration

    Swift

    @discardableResult
@inlinable
func onNotifyWrapWidth(flags: ConnectFlags = ConnectFlags(0), handler: @escaping (_ unownedSelf: CellRendererTextRef, _ pspec: ParamSpecRef) -> Void) -> Int

    Parameters

    flags

    Flags
    unownedSelf

    Reference to instance of self
    pspec

    the GParamSpec of the property which changed.
    handler

    The signal handler to call Run the given callback whenever the notifyWrapWidth signal is emitted
    Show on GitHub
  • notifyWrapWidthSignal Extension method

    Typed notify::wrap-width signal for using the connect(signal:) methods

    Declaration

    Swift

    static var notifyWrapWidthSignal: CellRendererTextSignalName { get }
    Show on GitHub

CellRendererText Class: CellRendererTextProtocol extension (methods and fields)

  • Sets the height of a renderer to explicitly be determined by the “font” and “y_pad” property set on it. Further changes in these properties do not affect the height, so they must be accompanied by a subsequent call to this function. Using this function is inflexible, and should really only be used if calculating the size of a cell is too slow (ie, a massive number of cells displayed). If number_of_rows is -1, then the fixed height is unset, and the height is determined by the properties again.

    Declaration

    Swift

    @inlinable
func setFixedHeightFromFont(numberOfRows: Int)
    Show on GitHub
  • parent Extension method

    Undocumented

    Declaration

    Swift

    @inlinable
var parent: GtkCellRenderer { get }
    Show on GitHub